Pro Line Atomik AGW-286

The AGW-286 filter:

The lens consists of a base of our AUR^®-92 filter with an upper section of Green Welding (Shade 3, 4, 5, or 6), and a lower section of Green Welding (shade 4, 5, 6, or 8). You may have your lenses made half and half or one third/two thirds. The shades in standard configuration are light on top and dark on the bottom. The reversed configuration (custom made, not returnable) is dark on top and light on the bottom. Your choice.

The available shade configurations are:

• 3/5
• 3/6
• 3/8
• 4/6
• 4/8
• 5/8
• 6/8

This filter is particularly valuable for use in fuming and other tasks where the brightness of the flame is a problem. It will also lend itself to most borosilicate glass work where larger sculptural work is done. By tipping your head you can change the shade number you are viewing through as the brightness of the glass changes.

Lenses are available in plano (non-prescription) and single vision.

Protected under United States Patent Number 6,612,697.

Specifications (Shade 4):

Maximum Visible Light Transmission: 11.2 %
Average (400 to 750 nm) Visible Light Transmission: 4.9 %
Average (751 to 3000 nm) IR Transmission: 4.0 %
ANSI Welding Shade Equivalent: 3.5 approximate

Specifications (Shade 5):

Maximum Visible Light Transmission: 5.7 %
Average (400 to 750 nm) Visible Light Transmission: 2.1 %
Average (751 to 3000 nm) IR Transmission: 1.5 %
ANSI Welding Shade Equivalent: 4.5 approximate

The frame:

Modern, up-to-date wrap-around styling, plus ventilated eye chambers to prevent fogging, and is available in black and gunmetal.