Are you using a hot plate to pre-heat your soft glass rods or Murrini? Ever wished for a safer alternative?

Introducing the RANA Rod/Murrini Warmer. Designed to keep your hands and fingers safe from uncovered elements or overheated hot plate elements, the Rod/Murrini Warmer will handle up to a dozen soft glass rods AND several dozen Murrini bits at the same time.

The Rod/Murrini warmer uses proven heater and temperature control technology to keep your glass at a constant 600 degrees F.

Weighing just 10 pounds, the Rod/Murrini is portable too. Take it with you the next time you travel to a remote site.

Using just 5 amps of power, it can easily run on the same circuit as other electrical items in your studio, such as radios, fans or lights.

Get rid of that unsafe hot plate!

Shipping weight: 12 pounds.

Power: 120 Volts (U.S./Canada), 5 Amps max or 220 Volt (Continental Europe and United Kingdom), 3 amps maximum (fused).

Now Available in 220 Volt power for Continental Europe and United Kingdom.

Select voltage: Standard 120 Volt (US/Canada) - $0.00 Standard 220 Volt (Europe) - $0.00 Standard 220 Volt (UK) - $0.00

Price: $ 189.95

Unsolicited product testamonial:

Hello Mike,
I just got my rodwarmer from you today, and must tell you how wonderful it is! Here in Michigan we are having a very cold winter, and since I torch in an unattached garage workshop it's been difficult, if not impossible to work Moretti. Till now!!! Even though my 10 degree makeup air from the window was rushing past me into the vent fan, I was able to work the shocky handmade Moretti colors without losing half the rod from cracking and popping. And the glass just heated up so nicely, no gradual teasing into the flame required, and flowed smoothly onto the rod--unusual for some of those $30 a pound colors, which are either stiff or drippy, rarely in between. It is amazing that a simple device such as a rod warming oven could make such a difference, but it does!!
Thanks so much for providing us with this great appliance. Years ago I tried a homemade hotplate setup others had recommended but it didn't seem safe so I put it away. In the meantime, I've shattered many a rod end being impatient. This RANA is going to pay for itself in a very short time.
A totally satisfied customer,
Anita Pepper