AUR-99 Filter

AUR-99 Filter for hot/warm glassworking and metalworking

This lens is a soft green color and is available in shades 2.0, 2.5, 3, 4, 5, 6, and 8. The spectrum of this glass shows excellent ultraviolet and infrared protection. The visible light transmission is adequate for good visibility under most shop working conditions where illumination is somewhat limited.

This filter does NOT provide sodium flare protection. Suggested uses are off hand work, allowing comfortable viewing of glory holes, fire buckets, gathering, enameling, and general kiln work. This filter is also recommended for use while forge working and forge welding.

AUR-99® bifocals are supplied with Aura's exclusive "Uniform Density" feature. A wafer of AUR-99® is laminated over a thinly ground glass bifocal lens - giving you the same filtration through the bifocal as around it. No other manufacturer can make this claim. This lamination process also makes for a safer lens.

Lenses are available in plano (non-prescription), single vision, and laminated bifocals and trifocal style lenses.

Thickness Advisory: This filter is thicker than normal lenses. In non-prescription form, it is approximately 3.5 mm thick. Single vision prescription adds at least 1 mm, bifocal prescription adds at least 2 mm. 

NOTE: THIS FILTER IS NOT DESIGNED FOR USE BY LAMPWORKERS.

Picture of AUR-99 - Non Prescription
AUR-99 - Non Prescription
Non-prescription lenses
Delivery date: Ships in 1-2 working days, plus time in transit
*

Select from the available shade numbers.

*

You can have standard 6 base lenses or wider, wrap 8 base lenses installed.

$109.95 excl tax
Picture of AUR-99 - Readers
AUR-99 - Readers
AUR-99 Reading Power Lenses
SKU: 723x0-LNZ-RxRD
Delivery date: Ships in 7-10 working days, plus time in transit
*

Select from the available shade numbers.

*

Please select your reader power from the drop down list below.

Readers are sold as a pair, with both lenses the same power. 

*

Please enter your PD (pupillary distance) information below.

Pupillary Distance: xx/xx or Right xx Left XX

Replace xx with the numbers on your prescription.

Note that PD's are required for all corrective eyewear and that we cannot process your order in our lab without it. Failure to provide a PD at time of order will result in your order being delayed until we receive it.

$172.45 excl tax
Picture of AUR-99 - Single Vision Rx
AUR-99 - Single Vision Rx
AUR-99 Single Vision Prescription Lenses
Delivery date: Ships in 7-10 working days, plus time in transit
*

Select from the available shade numbers.

*

Please enter your prescription information below.

Prescriptions should be entered in the following format:

Right Eye
Sphere  x.xx Cylinder x.xx Axis xxx

Left Eye
Sphere x.xx Cylinder x.xx Axis xxx

If your prescription requires prismatic correction please note the amount for each eye after the entry for Axis and the direction: in, out, up, down.

If your prescription is spherical only, you may see the letter DS or a line through Cylinder. Just enter the data as shown on your prescription.

Replace xx with the numbers on your prescription, please be sure to include any plus (+) or minus (-) signs as indicated.

*

Please enter your PD (pupillary distance) information below.

Pupillary Distance: xx/xx or Right xx Left XX

Replace xx with the numbers on your prescription.

Note that PD's are required for all corrective eyewear and that we cannot process your order in our lab without it. Failure to provide a PD at time of order will result in your order being delayed until we receive it.

$234.95 excl tax
Picture of AUR-99 - Multifocal Rx
AUR-99 - Multifocal Rx
AUR-99 Multifocal Prescription Lenses
SKU: 723x0-LNZ-RxMF
Delivery date: Ships in 7-10 working days, plus time in transit
*

Select from the available shade numbers.

*

Please select the type of Multifocal you wish

*

Please enter your prescription information below.

Prescriptions should be entered in the following format:

Right Eye
Sphere  x.xx Cylinder x.xx Axis xxx

Left Eye
Sphere x.xx Cylinder x.xx Axis xxx

Add Power: x.xx

If your prescription requires prismatic correction please note the amount for each eye after the entry for Axis and the direction: in, out, up, down.

If your prescription is spherical only, you may see the letter DS or a line through Cylinder. Just enter the data as shown on your prescription.

For Plano power bifocals, enter 0.00 Sphere for each eye, and then the amount of power for the bifocal.

Replace xx with the numbers on your prescription, please be sure to include any plus (+) or minus (-) signs as indicated.

*

Please enter your PD (pupillary distance) information below.

Pupillary Distance: xx/xx or Right xx Left XX

Replace xx with the numbers on your prescription.

Note that PD's are required for all corrective eyewear and that we cannot process your order in our lab without it. Failure to provide a PD at time of order will result in your order being delayed until we receive it.

$284.95 excl tax